Add：Jingye International 1308,Jinsui Avenue and Xin'er street intersection,Hongqi District
Release time：2016-04-19 10:14
Radiator for construction machinery is a necessity for a variety of vehicles, it can be p-revent the fault due to high temperature, when high pressure is filled hot coolant in the ta-nk will be damage to the engine. Today, we will introduce construction machinery radiator cl-eaning methods.
1.when cleaning the tank must pay attention, and slowly opened the lid, and then carrying out the next steps needed to erase all kinds of dirt on the tank. Paying attention to in acco-rdance with the direction of the water tank radiator in the direction of cleaning, do not rev-erse, because the metal is not only easy crushed, but also easy to bend deformation. Finally, you can guide a gentle flow of water from the top of the tank grille , removing all the debr-is.
2.It is very important to discharge the waste coolant properly. Coolant is a toxic liquid, but has a sweet taste and relatively easy to attract children and animals, so can not just em-issions, should be properly deal with, do not to use the drainage disk in any kitchen, remember to discard after using.
3.The water tank cover is sealed and pressurized coolant in water tank that enables the engine to keep cooling.The coolant pressure varies with the engine, and the pressure rating is indicated on the top of the cover.The tank cover comprises a spring coil, stretching small flat metal sealing rubber between the top and bottom .
The tension between the spring and the rubber seal is the key to keep the lid pressure, so if it is easy to compress both, it indicates that the tank cover is worn and should be replaced. When changing, need to check model is consistent, need according to the quality factor to consider.